To alter the aesthetic of your fireplace, you may need to remove your fireplace insert. It is also a necessary step before selling your home to bring it up to code. A fireplace’s aim is to assist a typical masonry fireplace in heating more effectively. A fireplace insert may also be removed by yourself. Continue reading to find out how to accomplish it.
How to dismantle a wood-fired fireplace insert
All trimmings surrounding the device must be removed.
Around your wood-burning fireplace, you must remove the masonry, drywall, rockwork, or frame. This requires the use of a hammer or mallet.
Remove any nails if necessary.
In reality, your insert may be surrounded by anything, such as flat metal bits or flashing. They serve to keep the insert in place. Then, using the hooked point of your hammer, grasp the head of each nail.
Using a crowbar, pull the insert out of place.
A fireplace electric insert can weigh up to 250 pounds. You can free it from its surroundings using a crowbar. To avoid hurting your back, ask someone to assist you in moving the insert.
Disassemble any vents, pipes, or other components.
We recommend removing as many inserts as feasible. Before moving the insert, disassemble anything that can be dismantled. Additionally, look for fasteners that can be removed with a tool. To remove the insert, use a hammer to smash it off.
Place a thick carpet in front of the fireplace.
Before removing your insert, place a piece of extra carpet, a thick rug, or another cushion on the floor. Because of the thick carpet, you can easily move the insert over the floor. Furthermore, you won’t have to worry about harming your floor. You’ll need a carpet that’s 1.5m longer and wider than the insert.
This feature helps you to more easily grasp the edges. It should also have a thickness of at least 2.5 cm.
To relocate the insert, drag the carpet across the floor.
This method is great for cleaning a hardwood floor. However, it is still a good idea to get assistance. It may be necessary to hoist it over a raised bed. If you want to keep the fireplace on the second level, you need to hire expert movers.
Put it on your carpet and wiggle it around.
If you are unfamiliar with heavy lifting, you should get assistance to avoid injury. To get your insert out of the location, use a push-pull approach. The insert will then be inserted into a section of your carpet.
If the vent is not in use, close it.
To seal it, use screws to connect sheet metal cuts or a piece of plywood cut to the size of your vent. You may also purchase a chimney cover. Then, keep it on top of the chimney.
Remove any ash and dust from the area using a vacuum.
It’s possible that transferring your fireplace insert may be a shambles. As a result, it is important to tidy up once you finish the project. To accomplish this, thoroughly vacuum the area.
A wood-burning fireplace insert must be removed if you wish to clean both the fireplace and the chimney. This process is less difficult than eliminating a gas. The majority of them are bulky. They are also bolted and screwed to the enclosure. You can get it removed by a specialist.
You may also do it on your own. Follow the procedures outlined above. They will make your work simpler.