Updating the Netgear firmware timely helps in keeping your WiFi device functional. That is why Netgear regularly rolls out a new firmware version for its WiFi devices. You can update the firmware of your Netgear router by accessing the Nighthawk router login page and that of the extender by accessing the extender login page. But, what happened? Did you fail to update the firmware of your Netgear Nighthawk extender? Worry not! We’re here for you. In this article, we have summed up various troubleshooting hacks that will help you get rid of the issue you are currently facing. So, read on.
Fixed: Netgear Extender Firmware Update Failed
Check the Ethernet Connection
The first and foremost reason that brings failure in the Netgear extender firmware update process is a weak Ethernet connection. So, before you execute any other troubleshooting hack, check if the Ethernet cable connecting your Netgear Nighthawk extender and the router is in good condition. Discard it if damaged and get yourself a brand new Ethernet cable.
Also, ensure that there is a safe distance between your Netgear extender and the router. If your WiFi devices are placed too close, then it can result in a clash of their signals and lead you to another issue like Netgear WiFi not working.
Remove WiFi Interference
You can also struggle with the Netgear extender firmware update failure issue due to interference of WiFi signals. Chances are that your Netgear Nighthawk extender is placed in a room filled with WiFi interference objects. In order to get the issue fixed, change the location of your WiFi device.
While relocating your Netgear Nighthawk extender, ensure not to place it near microwave ovens, baby monitors, refrigerators, mirrors, fish tanks, cordless phones, etc. In addition, choose a well-ventilated location to place your Netgear extender. Once done, try performing Netgear extender firmware update again. If the issue is still bothering you, then walk through the next troubleshooting hack.
Download the Compatible Firmware
The Netgear extender firmware update issue can also occur due to an incorrect firmware file. Perhaps, you have downloaded an incorrect firmware file.
To troubleshoot the issue, we suggest you download the firmware file that is compatible with your Netgear Nighthawk extender.
Do Not Perform Background Activities
Another reason why you are failing to update your Netgear Nighthawk extender’s firmware is that you’re running background activities on your device amidst the process.
To successfully update the firmware of your Netgear extender, it is recommended not to run any background task on your computer. So, avoid switching tabs, closing the web browser, or disconnecting your Netgear extender from the power socket.
Reset Your Nighthawk Extender
Followed all the above-mentioned troubleshooting hacks, but still no luck? Don’t worry! You can still get rid of the issue. All you need to do is reset your Netgear Nighthawk extender. Doing so will restore your extender to the factory default settings. So, without any delay, let us make you aware of the steps to perform factory default reset of the Netgear extender.
Follow the steps given below in order to reset your Netgear Nighthawk extender:
Ensure that your Nighthawk extender is receiving an adequate power supply.
Once assured, start looking for the Reset button on the extender.
As soon as you find the Reset button, use a sharp object to press it.
Your Netgear Nighthawk range extender will get restored to factory default settings.
Now, perform Netgear WiFi extender setup from scratch by accessing the mywifiext page. This time you will definitely get rid of the ‘Netgear extender firmware update failed’ issue.
This was all about what to do if you are facing the ‘Netgear extender firmware update failed’ issue. We hope that this article will help you fix the issue. If it did, feel free to leave a word of appreciation in the comment section.