An All-Inclusive Guide to Fix Not Working Issue

enable smart connect

Whether you want to perform Netgear extender setup, change the default password, or enable Smart Connect, accessing is important. However, if that is exactly what you are not able to do, then you are in some serious trouble. 

But, worry not. Every problem has a solution. This one has a solution too. Thus, walk through the troubleshooting tips mentioned in this post and learn how to get rid of the not working issue in a matter of minutes.

Why is Not Working?

There can be plenty of reasons why you are not able to access the login page of your Netgear wireless extender. Some of them have been outlined by us below:

  • Incorrect web address
  • Poor internet service
  • Weak connection between WiFi devices
  • Outdated or corrupted firmware
  • WiFi interference
  • Technical glitches
  • Outdated internet browser

Now, you are free to take the help of the troubleshooting tips mentioned below and learn how to fix the not working issue.

Fixed: Not Working Issue

  • Reboot Your Netgear Extender

As mentioned above, one of the major reasons why you are stuck with the not working issue is because of technical glitches. But, fret not because you can get rid of these glitches by rebooting your Netgear extender. Here is how you can do that:

  • Power off your Netgear range extender and unplug it from the electrical outlet.
  • Wait for some time.
  • Plug the extender back into the wall outlet.

Now, check whether you are still being bothered by the not working issue. If you are, then it is recommended that you try the next troubleshooting hack.

  • Use the Correct Web Address

There is a possibility that you have not entered the correct web address in the address bar of your internet browser.

To rectify your mistake and successfully access mywifiext, make sure that you are using the correct web address. Once you are done typing the web address, do not forget to cross-check it.

  • Keep WiFi Interference at Bay

Make sure that your Netgear wireless range extender is placed away from things like mirrors, fish tanks, cordless phones, treadmills, washing machines, televisions, baby monitors, Bluetooth speakers, refrigerators, aluminum studs, microwave ovens. 

Additionally, avoid placing your Netgear extender in corners or near thick concrete walls.

  • Update the Web Browser

Updating the web browser that you are using to access the local page can also help you fix the issue you are currently struggling with. 

Therefore go to Settings of whichever browser you are using, and update it to the latest version. Then, try to access the web page. 

  • Reset Your Netgear Extender

Last but not least, if nothing has worked for you in troubleshooting the not working issue, it is recommended that you reset your Netgear range extender.

By following the below-mentioned steps, you can easily restore your wireless device to the factory default settings:

  • Look for the Reset button located on your Netgear extender.
  • Once found, carefully press it using a pointed object.
  • Wait for a couple of seconds and let your device get restored to the default mode. 

In this manner, you will successfully be able to reset your Netgear wireless range extender.

Once you are done resetting your device, reconfigure it by accessing Trust us, this time you will surely be able to access

Wrapping Up

Our guide to troubleshoot the not working issue has come to an end here. Let us hope that after taking the help of the aforementioned troubleshooting tips, you will be able to log in to your Netgear wireless range extender via If you do, don’t hesitate to share it with us via the comment section. We would love to know that we could be of some help.

You May Also Like

About the Author: saloni singh

Leave a Reply

Your email address will not be published.